Chosen by 39 of the top 40 Electrical Engineering Firms in the world.
1-800-500-4SKM sales@skm.com
 
Loading
     
 

NetHasp Status Codes Table

0 Operation successful.

1 The IPX, NetBIOS, or TCP/IP protocols have not been installed properly - act accordingly.

2 Communication error - unable to get the socket number (applies to IPX and TCP/IP). Verify that the protocol is installed properly.

3 Communication error.
NetBIOS - unable to establish the session.
IPX - unable to get the immediate address of the HASP License Manager. Verify that the protocol is installed properly.
TCP/IP - unable to connect to the server. Verify that the server address is correct.

4 No HASP License Manager was found. Check whether your application has a path to the address file and read permission.

5 Cannot read the HASP License Manager address file.

6 Cannot close the HASP License Manager address file.

7 Communication error - failed to send packet. Verify that the protocol is installed properly.

8 The network is busy.
IPX - the network is busy or incorrect address files were found. In the latter case, delete all copies of the "haspaddr.dat" and "newhaddr.dat" files.

10 You called the hasp( ) routine with one of the services, without first calling the Login service.

11 Communication error - adapter error (applies only to NetBIOS).
Verify that the protocol is properly installed.

15 No active HASP License Manager was found.

18 Cannot perform a HASP4 Net login because of an unsuccessful SetServerByName call.

19 Syntax error in the configuration file. The LastStatus service returns the line number in which the error occurred in Par2. If LastStatus returns 0 in Par2, there is an environment variable with an illegal setting.

20 Error handling the HASP4 Net configuration file. A file operation such as "open file" or "read file" failed. One possible reason could be that the system is out of file handles. The LastStatus service returns the OS system error code in Par2.

21 HASP4 Net did not succeed in allocating memory. This error is unique to HASP4 Net interfaces under DOS extenders and Windows. Try to free DOS memory.

22 HASP4 Net did not succeed in freeing DOS memory. This error is unique to HASP4 Net interfaces under DOS extenders and Windows.

23 Invalid HASP4 Net memory address.

25 Failed to load winsock.dll (applies only to TCP/IP and IPX).

26 Failed to unload winsock.dll (applies only to TCP/IP and IPX).

28 Winsock.dll startup error (applies only to TCP/IP and IPX).

30 Failed to close socket (applies only to TCP/IP).

33 SetProtocol service requested without performing logout.

34 Access to key prohibited because the application is running on Citrix Winframe or Windows Terminal Server (service pack 4+ required to detect if this is running on the console screen).

129 The correct HASP4 Net is not connected to the HASP License Manager.

130 The program number specified is not in the program list of the HASP4 Net memory.

131 Error reading from HASP4 Net memory.

132 Error writing to HASP4 Net memory.

133 The current Login request exceeds the number of stations which may run the application at the same time.

134 The current login request exceeds the number of authorized activations for the application.

135 You called the hasp( ) routine with the Logout service without first calling the Login service.

136 The HASP License Manager is busy - this may occur if your HASP4 Net system is not well adapted to the network.

137 There is no space in the HASP4 Net log table.

138 Internal HASP4 Net error - the number of licensed stations is larger than the maximum number allowed by the HASP4 Net model.

139 The computer with the HASP4 Net crashed and was reactivated, or you called the hasp( ) routine with a service (not including 40, 85, or 96) without first calling the login service.

140 The HASP License Manager does not serve the network of your station.

141 Invalid service, or new version of the HASP API is communicating with an older version of the HASP License Manager.

142 The HASP License Manager matching the name specified in the HASP4 Net configuration file was not found.

150 No HASP License Manager with the assigned name was found. This error is returned by the SetServerByName service.

151 Two or more different HASP License Managers with the assigned name were found. This error is returned by the SetServerByName service.

152 The encode operation failed because the hardware does not support the service.

153 The decode operation failed because the hardware does not support the service.

155 An old version of the License Manager has been found. The API used requires a newer version of the License Manager to be installed.

 
     
 

If you have additional questions, please feel free to contact tech support.